To place order, please
register

    Wide Camera/Lens Compatibility

    The Auto Configuration feature means the Ronin can adapt to a range of camera sizes from lightweight mirrorless models up to cinema cameras. It is suitable for payloads up to 16 pounds.


    SmoothTrack Control

    SmoothTrack gives a single gimbal operator the ability to translate their tilt and pan movements of the gimbal into smooth and stabilized movements of the camera's angle. This is designed to make framing of broad wide-angle scenes or even shooting in close quarters much easier during single gimbal operator use.


    Auto Configuration

    After balancing the camera with a simple tap of the ATS (Auto Tune Stability) button, Ronin will be automatically tuned for the mass and weight distribution of your camera rig. The gimbal will intelligently adjust parameters based on the camera rig's weight and independently adjust each of the three axes until an optimal setting is found.


    Three Operation Modes

    Upright Operation Mode

    Upright Mode allows the gimbal to be flipped over so the camera can be operated closer to eye level without straining to lift the gimbal. This can be used in various situations, such mounting on the top of the vehicle.


    Underslung (Suspended) Operation Mode

    Suspended Operation Mode is the standard operation mode for Ronin. Low slung, close to the ground, or simply holding the gimbal in front of you offers stabilized handheld footage. This mode would also be used when mounted the gimbal on a flying platform such as a multirotor RC helicopter.


    Briefcase Mode

    When a slimmer gimbal profile is needed - such as when moving through doorways or narrow paths - Briefcase Mode is ideal. It allows the gimbal to be held to the side and close to the legs, much like a briefcase.


    Second Operator Control

    A second operator transmitter (radio controller) is included with the package. Featuring the form factor of an RC aircraft radio controller, the 2.4 GHz Ronin transmitter provides pan and tilt control as well user-assignable speed settings and operation modes via two toggle switches. If you would rather use a third-party transmitter a D-bus port is provided.


    Optional Joystick Pan/Tilt

    Single thumb control is possible for the Ronin Handheld Gimbal System. These Pan and Tilt movements are controlled via the optional joystick attachment, available separately. Additionally, SmoothTrack Mode can be turned on or off using the joystick interface.


    Assistant Software for Mobile and Windows

    A mobile device or computer to run the Assistant Software is essential. It is available for select iOS mobile devices and Windows computers. With the software you can:

    • Auto Configure the rig based on the weight and weight distribution of your camera after you've balanced it
    • Adjust Smoothtrack tuning to user preference
    • Enable and configure Second Operator Control
    • Run diagnostics and generate stats
    • Install firmware updates


    Tool-Free Adjustment

    A built-in balance adjustment system means no tools are needed for setup and adjustment, saving time when changing the setup for different camera arrangements.


    Accessory Mounting

    Dual 15mm (LWS) rods are incorporated for adding follow focuses or matte boxes. Meanwhile top bar accessory mounts let you attach field monitors, lights, microphones, recorders, and other "camera-mounted" accessories.


    Quick Release Smart Battery

    Providing an estimated 4 hours of run time (depending on use), the proprietary Ronin battery system is designed for easy changes in the field and charges using a dedicated charger that is included. The batteries feature indicators so remaining power can be checked directly on the battery itself. Unlike may lithium-polymer batteries, with the Ronin Smart Battery, overcharge and over depletion protection is built-in, as is individual battery cell charge balancing.


    Power Distribution Box

    Two regulated 12V DC PowerTaps, one 500mAh type A female USB connector, and also a connection point for the DJI Lightbridge Long Range HD Video Downlink are provided. These provide power connection for various accessories, including motorized follow focus systems, video transmitters, and more - all while keeping the wiring to a minimum.


    Quick Release Top Handle

    Designed to save time breaking the system down or transporting it between locations.

    Protective Carrying Case Included

    A watertight, hardshell case with wheels is included for transporting and storing the Ronin. The case features a custom-fitted foam interior with spaces for the disassembled Ronin, transmitter, and two batteries with room leftover for sundry accessories.


    Based on Zenmuse Technology

    The Ronin adapts the same brushless motor technology used in DJI's aerial gimbals for handheld, terrestrial use.

    Aircraft-Grade Aluminum Construction

    Built with taxing professional shoots in mind, the Ronin is designed for durability and features integrated cable management to avoid cable ties or loops that can get snagged.

    Digital Absolute Positioning Encoders

    Implemented at each axis, these help the Ronin achieve a control accuracy of ±0.02%.


    Compatible Accessories

    • Wireless Thumb Controller for Ronin (Note: The Wireless Thumb Controller for Ronin-M is not compatible)
    • Ronin Battery (3400mAh) (Note: The Ronin-M battery is not compatible)
    • Ronin Battery Charger
    • Ronin Remote Controller
    • B Arm Kit for Ronin (50 and 80mm)
    • Ronin HG900 Counter-Weight Set
    • Ronin Dual 15mm Rod Support
    • Ronin Monitor Mounting Bracket A
    • Ronin Universal Mount
    • Ronin Universal Camera Plate
    Show Description
    Renting period

    Added to Cart

    The RUNNER is the ultimate support system for 3-Axis Gimbal Stabilizers such as the Tilta Gravity, DJI Ronin, Freefly MoVI and any other gimbal with a dual hand grip design. An upgrade to the original Armor-Man, the Armor-Man 2 has been improved with smart new features to meet the needs of today's camera operating professionals. 


    · Compatible with Tilta Gravity, DJI Ronin, Freefly Movi and various other gimbal systems 

    · Quick release dual spring arms with adjustable tension control 

    · Swivel down spring arms can be clipped along your waist for resting between takes 

    · Adjustable vest for a comfortable custom fit 

    · V-Lock battery plate with 4-Pin Lemo power socket 

    · Swivel hand grip support for arms free control and mobility 

    · Packed in a traveling hard case with a custom protective foam insert 


    Ultimate Gimbal Support 

    The Armor-Man 2 is designed to work with leading 3-axis gimbal stabilizers such as the Tilta Gravity, DJI Ronin and the Freefly MoVI. The Armor-Man 2 is capable of supporting a wide range of gimbal camera set ups. 


    Quick Release Arms 

    With an innovated quick-release system each support armis quickly snapped into the support vest. Each arm features two spring loaded support sections. The tension of each spring section can be adjusted through knobs located along each joint. When not in use, each arm can be swiveled down into resting position. Simply by pulling on the release cord and locking each arm into place along the hips of the operator. 


    Swivel Hand Grip Support 

    Adjustable swivel hand grip supports are located at the end of each arm. Each gimbal hand grip rests inside the support allowing the operator to keep their arms free for any hands on camera adjustments. They also provide support without limiting the operator's range of movement. 


    Integrated Battery Plate 

    The vest comes standard with a V-Mount battery plate, with a 4-Pin female Lemo power connection socket. Through here the operator can run power directly to the gimbal through the right support arm with features several cable clamps. The Armor-Man 2 is also available in Gold mount through special order. 


    Custom Cut Foam Hard Case 

    The Armor-Man 2 comes protected inside a custom cut weatherproof travel hard case with a retractable handle, a pair of wheels and 4 quick-release latches.

    Show Description
    Renting period

    Added to Cart

    • G-1 is an very small lightweight external 2 axis Gimbal (pan axis is the EasyRig Cord).
    • It surrounds the camera externally in a very clever way so the operator can use the camera from shoulder to low mode.
    • It includes x/y positioning stages that enables you to perfectly balance the camera in 3 axis.
    • Its free float full bearing pivot supported gimbal in all crucial axis points.
    • It weights approx. 1800 grams and can fully support cameras up to 17 Kg or around 38 pounds.
    • It eliminates completely the pendulum effect created from the cord in all Easyrig style body mounts.
    • It allows the operator now to tilt freely with out effort +/- 60 degrees (that is approx. since there is always a little difference in camera height).
    • It allows the operator to freely roll the camera 30 degrees CCW, and 60 degrees CW.
    • Depending on the trim balancing tuning of the camera (perfect or a little bottom heavy) the camera will remain at all given tilting angles or rolling angles effortlessly, and the drag pendulum effect will completely be eliminated.
    • For moves being done without hands on camera, it produces very stable smooth footage, something that cannot be done without the G-1.


    Show Description
    Renting period

    The product will be in stock;

    Show Description
    Renting period

    The product will be in stock;

mm logo
There was a problem validating the form please check!
!
Successfully sent!